0936, 60 mm – PVC-free soft skirting board, 1.3 mm, grey

Create an attractive and functional transition between the floor and the wall with PRIMO’s PVC-free soft skirting board. The
flexible design follows the shape of the wall and helps to create a professional and uniform look.

The skirting board has been developed for areas where ease of cleaning, durability and simple maintenance are key
considerations. At the same time, the self-adhesive backing ensures quick and efficient installation.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

item number	0936-0002-45
DB	2614876
EAN	5709847011907
Hight	60 mm
Width	14 mm
Lenght	48 m
Colli	1 Pcs
Product type	Soft skirting board
Customs code	39162000

These PVC-free soft skirting boards are self-adhesive and designed for quick and easy fitting without the use of
screws or nails. To ensure the best possible adhesion, it is important that the skirting board is left to acclimatise in
the room where it is to be fitted for at least 3 days, and that the room temperature is at least 18°C at
the time of fitting.

The surface must be clean, dry and level, and free from dust, grease and loose plaster. Please note that
self-adhesive strips do not achieve optimal adhesion on all surfaces, including woodchip wallpaper,
hessian, water-scrubbed walls and other uneven surfaces.

When fitting, it is recommended that you remove the protective film as you go along and press the moulding firmly into place using even pressure
. The moulding must not be stretched during fitting. For the best-looking and most durable result
, mitre cuts are recommended in corners.

See the installation video and the full installation guide for detailed instructions.

How to fit the soft mouldings:

Temperature and acclimatisation: Store the moulding for at least 3 days in the room where it is to be fitted. The room must be at least 18 °C and thoroughly heated.
Prepare the surface: Ensure that the wall and floor are clean, dry and even. Remove dust and loose plaster. Avoid fitting on woodchip wallpaper or uneven walls.
Acclimatise the moulding: Unroll the moulding and leave it to rest for a short while. Do not stretch the moulding during installation.
Installation: Remove the backing film a little at a time and press the moulding firmly into place with even pressure in the direction of installation. Avoid removing the entire protective film in one go.
Corners: Cut the moulding at the corners to prevent it from coming loose. If necessary, use extra contact adhesive in the corners.
Maintenance: The strip can be cleaned with standard cleaning products and can be washed daily.