Clamp sealing – Model 0703

PRIMO clamp sealing can be used when you want to renovate windows and doors manufactured before 1990, when this type of gaskets was typically used. The clamp sealing ensures a tight seal between the frame and the sash, improving the insulation of the door or window.

If the gasket in your existing windows or doors cannot be replaced, we recommend the universal gaskets, which can be used when other solutions are not feasible.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

0703, 100 m – clamp sealing, gray

Variant: 0703-0006-45

DB: 2496264

EAN: 5709847010979

Colli: 1 Pcs

0703, 6 m – clamp sealing, gray

Variant: 0703-0005-45

DB: 2036663

EAN: 5709847070355

Colli: 13 Pcs

Additional information

Hight	4-7 mm
Width	12 mm
Lenght	100 m / 6 m
Colli	1 Pcs / 13 Pcs
Product type	Clamp sealing
Customs code	39162000

A properly installed sealing strip ensures a neat finish and a tight seal around doors and windows. The clamp sealing is easy to work with and is installed directly using a staple gun. It is important that the surface is clean and dry, and that the strip is positioned precisely so that it does not interfere with the function of the door or window.

Follow the steps below for a good, long-lasting result:

Clean the surface
Remove dirt and dust from the area where the strip will be installed so that it fits properly.
Measure the length
Use a measuring tape to determine the exact length you need.
Cut to size
Cut the trim to size with trim shears. Cut the corners at a 45° bevel. Position the strip correctly close to the surface, but without interfering with the door or window’s operation.
Secure the strip
Use a staple gun to secure the strip. Staple as needed, and make sure the trim is tight and straight. If the surface is uneven, it is a good idea to use more staples.
Finish with a check
Check that the strip fits snugly without blocking the opening/closing mechanism by closing the door or window.