5098-0001-45_5098-0002-45_5098-0005-45_hvid-scaled

Edge moulding – model 5098

The edge moulding is a versatile solution that gives your finishes a neat and professional look—whether you’re working with doors, windows, cabinets, or ceiling hatches.

The moulding has a soft, rounded shape that not only looks elegant but also enhances safety by eliminating sharp edges.

The moulding is made of plastic, making it both durable and resistant to moisture, smoke, and sunlight. This means you get a long-lasting solution that will look great for many years without requiring special maintenance. The smooth surface makes the moulding easy to clean, and its design minimizes dust buildup—perfect for both homes and commercial settings.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

5098, 0.9 m – edge moulding, white

Variant: 5098-0002-45

DB: 1854033

EAN: 5709847509824

Colli: 20 Pcs

5098, 2.5 m – edge moulding, anthracite

Variant: 5098-0004-45

DB: 2061574

EAN: 5709847509831

Colli: 20 Pcs

5098, 2.5 m – edge moulding, white

Variant: 5098-0001-45

DB: 1374242

EAN: 5709847509855

Colli: 20 Pcs

5098, 2.5 m – self-adhesive edge moulding, white

Variant: 5098-0005-45

DB: 2059379

EAN: 5709847509848

Colli: 20 Pcs

Additional information

Hight	21 mm
Width	5 mm
Lenght	2.500 mm / 900 mm
Colli	20 Pcs
Product type	Edge moulding
Customs code	39162000

The edge moulding is easy to install, whether you choose to nail, screw, or glue it. It will not split when fastened and can be adjusted to fit the surface. A practical solution for both professionals and DIY enthusiasts.

Here is how:

Measure and cut the moulding to the desired length.
Secure with small nails or screws every 30–50 cm—depending on the surface.
Alternatively, the trim can be glued using alcohol-based silicone or construction adhesive.
Press the moulding firmly into place and, if necessary, allow the adhesive to cure before use.

This edge moulding is also available with a self-adhesive backing, which makes installation extra easy:

Make sure the surface is clean, dry, and free of dust and grease.
Cut the moulding to the desired length.
Remove the protective film from the self-adhesive backing.
Press the moulding firmly onto the surface—start at one end and work your way along.
Press firmly along the entire length of the moulding so that it adheres securely.