Husk også...

Clips for FiberCore side/top glass trim

Glazing bead, side/top – Model 4199

PRIMO FiberCore glazing beads are an energy-efficient and durable solution for both windows and doors.

They are made from an advanced composite that combines natural plant fibers with the strength and low-maintenance properties of plastic.
This means the glazing beads provide up to 160 times better insulation than aluminum and have a U-value of just 0.18—effectively reducing heat loss around windows and doors.
At the same time, the material is resistant to moisture and weather. It does not absorb water and will not rot, crack, or dry out. This provides a solution that requires minimal maintenance and extends the lifespan of the windows.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

4199, 1.5 m – glazing bead, side/top, white

Variant: 4199-0002-45

DB: 1448112

EAN: 5709847419925

Colli: 10 Pcs

4199, 2.5 m – glazing bead, side/top, White

Variant: 4199-0007-45

DB: 1973555

EAN: 5709847419970

Colli: 12 pcs

4199, 4.0 m – Glazing bead, side/top, White

Variant: 4199-0003-45

DB: 1461651

EAN: 5709847419932

Colli: 12 pcs

Additional information

Hight	16 mm
Width	17 mm
Lenght	4.000 mm / 2.500 mm / 1.500 mm
Colli	10 Pcs
Product type	Glazing bead – side/top
Customs code	39162000

Installing PRIMO FiberCore glazing bead is simple and requires only a few tools. Thanks to the smart clip system, you are guaranteed a precise and attractive finish—with no visible nails or screws. Follow the steps below for proper installation:

Here is how:

Remove the existing glazing bead
Carefully loosen and remove the old bottom glazing bead, then thoroughly clean the window rebate of dirt and debris.
Take precise measurements
Measure the width of the rebate accurately to ensure the new horizontal bottom glazing bead fits correctly. Use the tightest rebate measurement.
Position the clips correctly
Place the clips against the glass and secure them in the pre-drilled holes with screws. The screws must be driven at an angle into the rebate – Use 5 clips per meter – The distance from the corners must not exceed 5 cm – The clips are designed for a 7° angled bottom rebate.
Snap the moulding into place
Press the FiberCore base glazing bead against the clips with light pressure until you hear a click. It is helpful to lightly moisten the glass tape with soapy water to facilitate installation.