Husk også...

T2000290 – Stainless steel nails

Glazing bead, side – Model 5064, White

Refresh your wooden windows with PRIMO’s solid side glazing beads—a durable and effective solution that protects against wind and weather. The glazing beads are made of weather-resistant plastic that neither absorbs moisture nor dries out over time. This means you will not have to worry about rot, mold, or ongoing maintenance, which often come with traditional wooden glazing beads.

When renovating existing windows, the solid side glazing beads provide an elegant and airtight finish that extends the window’s lifespan and ensures a beautiful result for many years to come. The beads are available in several variants, so you can find a model that fits your project perfectly—whether for doors or windows.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

item number	5064-0002-46
DB	4814901
EAN	5709847506441
Hight	16 mm
Width	25 mm
Lenght	2.500 mm
Colli	10 Pcs
Product type	Glazing bead – side/top
Customs code	39162000

When installing plastic side glazing beads, it is important to ensure precise cuts and proper fastening to achieve a tight and neat finish.

The mouldings are trimmed at both the bottom and top to match the window’s dimensions and angles.

The side glazing bead can also be used as top window trim, and installation is carried out in the same manner.

Always use stainless steel nails or screws to ensure long-lasting durability—and avoid dark colours, as they can cause the plastic to overheat and warp.

Installing the side glazing bead:

Cut the bottom at an angle that matches the slope of the bottom glazing channel
Measure from the base glazing bead to the top of the window and subtract 7 mm to allow for clearance
Cut the top at a 45° bevel
Secure with stainless steel nails or screws every 15 cm and no more than 5 cm from each end

Installation as a top glazing bead:

Measure the width for the top glazing bead
Cut both ends at a 45° bevel
Secure with stainless steel nails/screws every 15 cm and no more than 5 cm from each end

NOTE: We do not recommend painting the plastic mouldings in dark colours.