5073, 3.1 m – raised beading, black

PRIMO’s raised beadings are the obvious choice when you want an attractive and functional finish between countertops and walls in the kitchen, utility room, or bathroom. They also work brilliantly as discreet baseboards, especially in rooms where a simple and minimalist look is desired.

The raised beadings are made of durable plastic, making them completely resistant to moisture. They won’t warp or twist, and the plastic is resistant to rot and mold—a clear advantage in wet areas and for a healthy, allergy-friendly indoor environment.

With two heights and a wide selection of colors, PRIMO’s baseboards give you great freedom to customize the room in your own style. The baseboards are easy to install and require only minimal maintenance, making them a practical and aesthetic solution that will last for many years.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

Varenummer	5073-0010-45
DB	1853979
EAN	5709847507318
Højde	33 mm
Bredde	15 mm
Længde	3,100 mm
Colli
Produkttype	Trim mouldings
Toldnummer	39162000

The raised beadings are flexible and easy to install—both as back edge trim and as a finish against the floor or wall. They can be nailed, screwed, or slid into place without the risk of splitting, and with a few extra nails, they easily follow curved walls or floors.

For sharp curves, the moldings can be heated with a hair dryer or heat gun for extra flexibility—find the guide here.

If you want a clean and elegant result when using them as back edge trim, we recommend installing them with an alcohol-based silicone or a high-quality mounting adhesive.

Corners should always be cut at a 45° bevel for a neat finish. Since there are no separate end profiles, please refer to our installation guide, where you’ll find tips for a beautiful and durable end joint.

How to install the trim strip—step by step:

Cut the trim to size using a fine-toothed saw.
Cut the corners at a 45° bevel for an aesthetic and professional look.
Secure the trim with nails, screws, or staples—the plastic will not split.

When using as a back edge trim, we recommend alcohol-based silicone or installation adhesive.
For curved walls/floors: Use additional nails or gently heat the trim to shape it.
Finish it off nicely: Check out our guide on how to create a neat end joint without an end cap.