For 4-5 mm grooves
Soffit panel gasket clamp profile
Available in rolls of 6 m and 180 m.
Are your seals worn by wear and tear? – Reduce your heating bill by mounting replacements.
PRIMO Soffit panel gasket clamp profiles is developed based on the latest knowledge of sealing windows and doors. This moulding is a combination gasket that fits both 4 and 5 mm. not.
PRIMO gaskets are recommended when your old seals in windows and doors need renewal. The moulding fits most doors and windows and has been developed to ensure a strong corner connection as it is designed with cord. The high durability and resistance gives you optimal insulation and sealing for many years to come.
In the PRIMO range, there is a selection of sealing gaskets with several attributes that meets every need.
Sealing gaskets from PRIMO are mainly produced in the PVC-free material TPE, which is resistant when used outdoors.
When installing soffit panel gasket clamp profiles, the profile is cut at 45 degrees without over cut of the cord that is inside the seal.
You may use our trim shears for this purpose – you can find them under accessories for gasket clamp profiles.
Then, the moulding is installed in the corner and pressed into the groove.
Most of our clinching gasket clamp profiles also have a hard back that significantly simplifies installation.
Be aware that the seals are not completely pressed together when the door or window is closed as over time, they will lose their flexibility and thus impair sealability.